Wanted

Gearbox wanted

feeds@yuku.com (Hillclimber) — Tue, 20 Oct 2009 07:21:59 GMT

Still searching for Cosworth T5 or Type 9 gearbox.

Ebay prices seemed to have rocketed?

Minilite or Revolution 5 spoke alloy wheels for a Mantula

feeds@yuku.com (nomis) — Mon, 19 Oct 2009 20:07:00 GMT

Having studied wheels in the brochures and books and having learnt a lot from the forum I have narrowed my search for a set of alloy wheels down to 14in diameter 6in wide alloys with 20mm positive off set.

The wheel designs I am after are either Minilites or Revolution 5 spoke (as factory fitted to later Mantulas) preferably silver in colour.

My other (rather nostalgic) preference is for Cosmic wheels (as fitted to 3litre Volvo engined cars) but I am not sure they were...

Original Marcos alloy wheels

feeds@yuku.com (nomis) — Sun, 27 Sep 2009 18:59:22 GMT

Has anyone got a set of 4 original Marcos alloys refurbished or in good enough condition to be reconditioned? What is the going rate for these wheels?

Marcos alloy original wheel wanted

feeds@yuku.com (sylba) — Wed, 16 Sep 2009 17:37:07 GMT

Hi,
I'm looking for only one Marcos alloy wheel 5,5x13 (1600GT). Does anyone of you have one for sale?
Thanks
sylba

T. R. Lane Fabrications near Stroud - recommended by anyone?

feeds@yuku.com (Lecrin) — Sun, 06 Sep 2009 09:43:03 GMT

They seem to produce excellent bespoke roll cages, but they also mention chassis resto on their website. Has anyone used them for this? I'm close to wheeling a sad chassis out of the garage, and they're reasonably close to me - which would be great, if they're up to it.

Boot lid

feeds@yuku.com (Gary Harman) — Fri, 21 Aug 2009 19:23:45 GMT

Im in need of a boot lid for a Mantis or LM.........any colour will do! Gary

Interior light unit

feeds@yuku.com (Lecrin) — Sun, 09 Aug 2009 22:38:14 GMT

Yes, I know they're rare as hen's teeth, but I want one soooooo badly. I've managed to beg, borrow and been tempted to steal, all the rest of the trim for a completely empty 3L V6 Coupe cockpit, and the light is the last thing on the list. HELP!!!

rear screen repeat

feeds@yuku.com (boycey) — Sun, 09 Aug 2009 20:18:02 GMT

Hi Guys is there any news on the replacement screens yet?

rear screen

feeds@yuku.com (boycey) — Sat, 27 Jun 2009 21:26:56 GMT

i need a new rear heated screen or non heated for the LM600. or if none available a pespex screen will be fine, should i be contacting topcats? or MHS or even J kearns?

V6 Tacho

feeds@yuku.com (dparslow) — Fri, 19 Jun 2009 13:27:53 GMT

Anybody out there with an old V6 tacho.

set of DYMAG wheels

feeds@yuku.com (boycey) — Wed, 17 Jun 2009 10:05:03 GMT

Bit of a long shot, but i reckon the LM600 would suit a set of Dymag wheels as they are less busy than the BBS wheels currently on the car, and painted in low gloss met black would look awsome, i would have to adapt them to suit the single hub design but my man can do this! let me know if a set are going spare?

left hand taps required for rear suspension

feeds@yuku.com (Martyn123) — Sat, 30 May 2009 09:37:46 GMT

Hi,

Can anybody help save me a few £££ ?

For my Mantula trailing arms and rear anti-roll bar I am in need of a left hand 1/2" UNF tap and a left hand 5/16" UNF tap to clean up the threads for easy adjustment when it eventually needs setting up.

Having done the usual searches they are getting on for £15-£20 each and will probably never use them again. If anybody could loan/sell me some I would be most grateful, I would cover the postage...

Interior of GT Coupe - seats, door cards etc

feeds@yuku.com (Lecrin) — Mon, 18 May 2009 16:27:38 GMT

I've just bought a 3L, V-6 GT that has zero interior trim. If you have anything that's past its sell by date, ie completely trashed, especially seats and door cards, that you'd like to sell, instead of chuck out, please get in touch. I need something - anything - to use as a pattern.
Thanks,
David.

LM5OO part wanted

feeds@yuku.com (bigbore) — Sun, 17 May 2009 15:47:45 GMT

Anyone know where i could source a steering upper column cover part no 1086853, think its off Ford Sierra of some description

Roll Cage

feeds@yuku.com (Hillclimber) — Fri, 08 May 2009 18:09:42 GMT

Anyone knows whereabouts of a MSA approved roll cage suitable for a steel chassi V6, preferably bolt in type

Windscreen

feeds@yuku.com (LM600HK) — Tue, 07 Apr 2009 04:45:19 GMT

Hi,

Can anyone suggest source/s of laminated windscreen, suitable for a LM600 ?

thanks

MARCOS STILL WANTED

feeds@yuku.com (marcossimon) — Fri, 20 Mar 2009 11:35:09 GMT

Marcos still wanted , missed out on red/orange one on ebay , i should of gone on bidding.lol Happily willing to pay up to £7000 for the right one ( mantula or 3.0 v6 )Prices seem to be rising daily ( makes TVRS look rather good value at the mo !) Someone stop me turning to the darkside !

Marcos Mantara Wanted

feeds@yuku.com (PiperP2) — Tue, 10 Mar 2009 13:47:47 GMT

Looking for a mint Mantara 4.0 V8, interested in swopping for:

Probably the best and lowest mileage 111S for sale, 2005 Lotus Elise 111S, 160 BHP VVC engine, finished in Saffron !*%!+# with Black Leather, 5000 miles, never ever seen rain, total dry use only, no accidents, no kerb damage to wheels, no track days, no stone chips totally as new condition. Comes with a matching hard top. This is one of the last ones built with much...

MARCOS WANTED

feeds@yuku.com (marcossimon) — Thu, 26 Feb 2009 15:44:53 GMT

Where has all the Complete Marcos gone?

Marcos with 3,0 l Volvo

feeds@yuku.com (Hans1800) — Fri, 13 Feb 2009 18:30:19 GMT

Hello everybody!
I am looking for a Marcos GT with the Volvo 3.0 B30 engine, if anyone knows one for sale it would be great to hear from you. I am specially intersted in this version because I have several other Volvos also the 164 from which the engine was originally.
The car should be complete and drivable, I have all possibilities for a restoration but as everyone I am looking for the best buy. Unfortunately these cars are very seldom in Austria
so I hope to get an info...