Just posted on Pistonheads.
ADVERTISED ON BEHALF OF A FRIEND
PLEASE USE THE CONTACT INFO IN THE AD BELOW, THANKS
Ex Mark Hales/Allen Tolchard MOD Sports 3ltr GT Marcos 1967
Car is currently in bits & requires full rebuild, all main parts should be there to complete.
Spec as follows
GENERAL:
WOODEN Chassis
3ltr V6 Ford "Essex" +20o 2998cc
weslake Heads
Group 1 Cam steel timing gears all new
Thick wall block bored out 20o
Group 1 baffled sump (2 of)
Balanced crank & rods
Hepolite Racing pistons
Piper cam FR6
AP Racing F2 Clutch
Triple webber carbs on ford manifold 42DCNF
6 Branch exhaust cross over system
Luminishion electronics
Spares:
1 complete 3ltr standard engine
Spare blocks, heads, engine cradle
3 x new rads
2 x Ford v6 3ltr alloy gearbox
Close ratio 4 speed
Alloy bell housing + 1 Standard Cast
Group 1 exhaust, Capri flat pan box 3" complete syetem full race
AXLE:
Ford cortina axle with 6 new half shafts
2 x l/slip diff
BRAKES:
4pot front calipers with 11" front discs
3l Capri rear drums
WHEELS:
4 x 9"x13" Front Minilites
4 x 12"x13" Rear Minilites (1 damaged)
1967 Fibreglass body (Moulds inc to make new panels)
Roll cage
incs 4 wheel trailer (could do with a service)
The car was very successful when I raced it, with many Pole Postions, Class wins & lap records. I believe Jackie stewart also raced this car at some point, im trying to find evidence of this.
For information please contact me (Alan)
TEL: 01371 811436 (Mon-Fri 9am - 5pm)
Email: bbfinishing@btconnect.com (Any time)
Car is located near Bury St Edmunds, Suffolk, UK
SENSIBLE OFFERS INVITED
ADVERTISED ON BEHALF OF A FRIEND
PLEASE USE THE CONTACT INFO IN THE AD BELOW, THANKS
Ex Mark Hales/Allen Tolchard MOD Sports 3ltr GT Marcos 1967
Car is currently in bits & requires full rebuild, all main parts should be there to complete.
Spec as follows
GENERAL:
WOODEN Chassis
3ltr V6 Ford "Essex" +20o 2998cc
weslake Heads
Group 1 Cam steel timing gears all new
Thick wall block bored out 20o
Group 1 baffled sump (2 of)
Balanced crank & rods
Hepolite Racing pistons
Piper cam FR6
AP Racing F2 Clutch
Triple webber carbs on ford manifold 42DCNF
6 Branch exhaust cross over system
Luminishion electronics
Spares:
1 complete 3ltr standard engine
Spare blocks, heads, engine cradle
3 x new rads
2 x Ford v6 3ltr alloy gearbox
Close ratio 4 speed
Alloy bell housing + 1 Standard Cast
Group 1 exhaust, Capri flat pan box 3" complete syetem full race
AXLE:
Ford cortina axle with 6 new half shafts
2 x l/slip diff
BRAKES:
4pot front calipers with 11" front discs
3l Capri rear drums
WHEELS:
4 x 9"x13" Front Minilites
4 x 12"x13" Rear Minilites (1 damaged)
1967 Fibreglass body (Moulds inc to make new panels)
Roll cage
incs 4 wheel trailer (could do with a service)
The car was very successful when I raced it, with many Pole Postions, Class wins & lap records. I believe Jackie stewart also raced this car at some point, im trying to find evidence of this.
For information please contact me (Alan)
TEL: 01371 811436 (Mon-Fri 9am - 5pm)
Email: bbfinishing@btconnect.com (Any time)
Car is located near Bury St Edmunds, Suffolk, UK
SENSIBLE OFFERS INVITED
